If you find it difficult to recover your valuable data from a Mac with a corrupt OS, you need not worry about it anymore. For recovering the data, you can easily try to access the drive via Target Disk Mode – Intel Macs or Share Disk – Apple Silicon Macs on the other Mac for the purpose of dragging and dropping files. Even if that fails, you can boot into macOS Recovery – Command+R, thereby using the First Aid of the Disk Utility to repair the disk as well as use Terminal for ‘fsck’ commands. Even if you still do not get successful in this, you can use a professional recovery software, or you can use a data recovery service as the chief and foremost goal to get your files off before you try to attempt major fixes or even reinstalls.
Here’s the guide to recover data:
Initial assessment – simple fixes —You need to try the steps fast.
- Check the basics: You are required to ensure cables are secure. Then, you should try different ports, thereafter listening for drive noises which seem unusual. You must try safe mode. For that, you need to reboot by holding the Shift key to load minimal drivers. Sometimes, this can help in allowing access.
- Using Another Mac: You could try using another Mac – either Share Disk or Target Disk Mode. If you use an Intel Mac, you are required to connect with a FireWire or Thunderbolt cable and then boot by holding ‘T’ – Target Disk Mode. If you are using Apple Silicon, you ought to boot to Recovery – hold Power, then you need to go to Utilities and select Share Disk. Thereafter, select the drive and start sharing. Moreover, on another Mac, you can find it in Finder and then select Network for copying files.
When to use MacOS Recovery – Command+R:
- To boot into Recovery, first, you need to shut down and thereafter, power on by holding Command+R until you see the spinning globe or the Apple logo. Furthermore, you are required to run First Aid. For that, you need to open Disk Utility in the Utilities window and select your drive > Show All Devices. Click on First Aid and Run in order to repair the existing errors.
- Using Terminal – Advanced: If anyhow, First Aid fails, you can open Terminal in Recovery and type diskutil verifyVolume / – replace or with your volume name if it is something other than that. Then, you need to type diskutil repairVolume/ for checking and thereby repairing file system consistency.
- Restoring from Time Machine: You can use the option “Restore from the Time Machine Backup” in Recovery if you have a backup in order to restore specific files or even your system.
What to do if Recovery fails – Data Recovery Software
- Creating a Disk Image: You should use Disk Utility in Recovery for creating a disk image, that is, a clone of your failing drive, onto an external drive which is healthy.
- Scanning the image: You need to install the recovery software, such as Stellar or Disk Drill, on the Mac which is working or on a separate bootable drive. Thereafter, you ought to scan the disk image in order to find and recover files.
The Last Resort
- Professional service: When the software fails, the best bet for you is a professional data recovery service which is specifically for the drives which are physically damaged.
Conclusion
If you are undergoing any such situation, instead of trying to recover and restore the data by yourself, you should seek professional help, as handling it all by yourself can be risky. You can lose your data permanently. Hence, if you need any solution, you can rely on iTechnology Australia. Sella Silva works to provide better solutions to the people to help them recover and restore their valuable data and drives. Visit us today and get your precious data restored again.
FAQs
Q1: Is it possible to recover data from a MacBook that is not turning on?
A: You can try removing the internal hard drive and then installing it into an external hard disk drive enclosure.
Q2: What will happen if the OS gets corrupted?
A: If the OS gets corrupted, you have to experience critical errors, poor performance or sometimes, a complete system failure.
