Fixing Water Damaged Laptops Moonah

Fixing Water Damaged Laptops Moonah

    Your Query

    Fixing Water Damaged Laptops Moonah

    Fixing water damaged laptops Moonah

    Does water damage your laptop? It is a significant issue needed to get immediate attention. When this happens, the thoughts that come to mind are whether the problem can be fixed or whether it has gone forever. In that case, most people think the laptop is dead and will not be used in the future. But this is not the only outcome. Some damage may be done, but with following steps for Fixing water damaged laptops Moonah that are mentioned below can work wonders in your favour.

    When water spills on a laptop, significant damage has likely been done. However, the laptop can be saved from water damage if urgent attention is given.

    Fixing a water damaged laptop takes a lot of work. First, it requires some experience with electronics disassembling.

    Steps for fixing water damaged laptop

    Immediately turn off the laptop.

    The laptop should be disconnected from the power source and turned off. First, disconnect the charging cable from the laptop from the power source. Next, remove all easily detachable components from the laptop.

    Remove excess liquid

    If there is any remaining liquid on the laptop, remove it. It will help to decrease the risk of short circuits and also minimize laptop exposure to more liquid. You can also use a dry towel or turn the laptop upside down to remove the remaining liquid. Make sure that the laptop is facing down while cleaning excess water. This way, the water would not get into the laptop’s internal components.

    Remove battery

    Remove the battery from the laptop. Removing the battery will prevent the water from reaching the battery unit and other internal components

    Place the laptop on the towel.

    Place a dry towel on a flat surface, such as a table. Open the laptop like a book and lay it on the towel. This will speed up the drying process.

    Remove hardware

    Remove all possible hardware and take off the button cover. Take out RAM, SSD drive, and motherboard parts and wipe water.

    Remove keyboard

    One of the most important steps is to disconnect the keyboard after turning off the laptop because when water spills on a laptop, it may reach into the internal parts through the keyboard.

    Let it dry

    Leave the laptop to dry for at least 24 hours. You can also use a warm fan to dry it quicker.
    After these processes, if the laptop would not turn on, then it is recommended to take your laptop to a professional for repair.

    What not to do?

    Don’t turn on the laptop.

    Do not turn on the laptop in the middle of the drying process. Instead, leave the laptop for at least 24 hours to dry.

    Avoid cloth with lint.

    Never use a towel containing lint to remove excess water from the laptop. Using a towel with lint can cause further damage to the laptop.

    Don’t use a hair dryer

    Never use a hair dryer. The heat can cause damage to the laptop.

    Do not shake the laptop.

    Never shake the laptop to remove the extra water. Shaking can allow water to get deeper into the laptop.

    If the laptop would not turn on, then it is highly recommended to take your laptop to I Technology. They have the best technicians that will make your laptop to working condition as soon as possible. You can also reach them through their official website.